Cycliq Fly12 HD Camera + Front Light
Details
The Fly12 front-facing bike camera and 600 lumen
light is engineered for peace of mind on the road
and a run time that lasts as long as you do.
Tech specs
Fly12 CE
Video
Bike camera resolution: 1080p Full HD video at 60 fps or 30fps (1920×1080 16:9), 720p video at 60fps (1280×720 16:9)
EIS: 6-axis Electronic Image Stabilisation
HDR: High Dynamic Range
Viewing angle: 135° wide angle
Recording structure: Looping video recording
Segment size: 900MB – 1.3GB (5 min segment at 1080p 60fps)
Video format: MP4
Light
Max brightness: 600 Lumen
Light modes: Constant, flash, pulse
Brightness setting: Low, medium, high
Audio
Output: 5 volume levels for alerts
Microphone: Stereo recording
Alerts: When turning your device on or off, an audible battery status will sound, alerting you to the current battery level.
A recording alert notification can be set which provides a confirmation chime at 3, 5, and 10-minute intervals to notify you that your device is still recording video footage.
Size and weight
Height: 3.3cm/1.3in
Width: 5.5cm/2.2in
Depth: 8.4cm/3.7in
Weight: 195g/6.88oz
MicroSD cards
Max microSD card size: 32GB
Type: Class 10 microSDHC
Supported SD cards: See the full list of recommended microSD cards.
Battery
Type: Rechargeable lithium-ion battery (built-in)
Size: 4200mAh
Watt hours: 15.96wh
Voltage: 3.8v
Charge port: USB-C fast charge accepting up to 2.1 amps.
Charge your Fly12 CE using a USB wall charger (not supplied) or a USB port on your computer.
Water and dust resistant
Ingress protection: IP67
Nanotechnology: We’ve used nanotechnology on the inside and outside of your Fly6 CE to protect it from the
elements. This process modifies the entire surface area of the circuitry at a molecular level, permanently leaving your
device in a hydrophobic state. This should greatly enhance the longevity of your Fly6 CE device
Connect
Bluetooth
Ant+
USB-C
Mounting
Cycliq 1/8th turn quick release
Handle bar mount with spacers provided
Sensors
Gyrometer
Accelerometer
Temp. range
Operating temperature: 0-45°C (32–113°F)
Storage temperature: 0-45°C (32–113°F)
In the box
1 x Fly12 CE
1 x Handlebar mount including 2.5mm hex bolt
1 x Universal adaptor mount
1 x M5 screw for universal mounting adaptor
1 x 22.2mm rubber handlebar adaptor
1 x Tapered rubber handlebar adaptor
1 x Quick start guide
1 x Safety information and warranty sheet
1 x USB to USB-C cable
1 x Safety Tether
If you’re involved in an incident, the Fly automatically locks the footages so it can’t be overwritten.
You’ll get up to 8 hours in camera only mode, and 4-5 hours with the lights on.
With 600 Lumens you’ll be seen day or night, and there are multiple modes to increase your visibility.
HD camera with 135° wide angle coverage at up to 60 frames per second with 6-axis image stabilisation.
Need to grab a coffee? Connect to the app and an alarm will sound if someone moves your ride.
Control your device using Bluetooth and our Cycliq mobile app or your Garmin bike computer using ANT+.
If the battery runs low, HomeSafe mode kicks in to keep the lights on for up to 30 minutes.
Never run out of space on your SD card, the oldest footage automatically gets overwritten.
Snap on and off in seconds with a 1/8 turn quick release custom mount, either above or below your bars.
Shoot rock solid footage no matter what the conditions with
6-axis electronic image stabilisation.
Hit the deck and the Fly12 locks the video and audio either
side of the incident. Smart video looping means you’ll never
run out of space on your SD card.
Waterproof to 1m with a
nanotech coating to keep out
the dust, dirt and destruction.
Snap on and off in seconds with a 1/8
turn quick release mounting system.
Part Numbers
| MPN | Store SKU |
|---|---|
| CE122 | FLY12CE122 |